ALKYD WOOD STAIN NEOMID BIO COLOR ULTRA
State Registration Certificate No. RU.78.01.06.008.E.000977.02.12 dd. 27.02.2012
PURPOSE:
Highly efficient alkyd wood stain for efficient protection and decorative finishing wooden surface. Suitable for interior and exterior use.
PROPERTIES:
Forms a glossy varnish film of high thickness with excellent protective and decorative properties. The active ingredients of the stain ensure five levels of wood protection:
- Double UV-filter effectively protects wooden surfaces from UVA and UVB rays.
- Natural micro waxes impart additional moisture/water resistance.
- Biocidal additives protect wood from mold, decay, fungi, algae and wood destroying insects.
- Protective varnish film of high thickness protects the surface from adverse weather conditions (rains, snow, frost).
- Lightfast pigments prevent colors from fading.
To improve adhesion to surfaces and reduce stain consumption, use Acrylic Preservative Wood Primer NEOMID BIO GRUNT before staining.
EXAMPLES OF USE. Use on interior and exterior surfaces, including wooden facades, decks, gazebos, fences, window units, doors, staircases, skirting boards, furniture, garden buildings, etc., for their protection and decoration.
SURFACE PREPARARTION. Make sure the surface is dry, well-sanded and free of dust. If you intend to paint highly resinous softwood, clean the surface with a cloth soaked in white spirit and let solvent evaporate completely. When handling fungal and mold-infected wood, treat the surface with a special purpose bleaching compound NEOMID 500. Sand worn-out wood to a healthy layer. Sand previously painted surfaces until the old finish is satin-smooth. It is good practice to do a test patch on a small area before staining.
SOLUTION PREPARATION. Ready mix, does not require thinning. Stir thoroughly before use. There may be slight batch-to-batch variations in the hue. To avoid inconsistent color mix the buckets together in a large container before staining.
APPLICATION. Apply stain at a temperature of at least +5°С and relative humidity no more than 80%. Apply 2-3 coats with a brush or spray gun along the wood grain, thoroughly impregnating butt-end surfaces; for topcoat use a brush. Intermediate sanding is required. The more coats you use, the more intense the color of the finish is. The service life of the film depends on climatic zone and atmospheric precipitation intensity. It is good practice to restain the surface from time to time.
DRYING TIME. Intermediate drying — 2 hours. Complete drying — up to 24 hours at +20ºС±2.
NUMBER OF COATS. 2-3 coats.
CONSUMPTION PER 1 COAT. Planed wood – up to 17 sq.m/l. Sawn wood – up to 8 sq.m/l. The actual consumption depends on wood type and its absorptiveness.
CLEANING UP. White spirit.
SAFETY MEASURES. Keep away from open flame! Use in a well-ventilated area. Wear gloves and personal protective equipment. Do not swallow. Avoid breathing vapors. In case of contact with eyes or skin, rinse with plenty of water. If swallowed, seek medical advice and show this package. Keep away from children! Prevent product from entering soil, drains and surface waters. Dispose the well-closed bucket with dry residue as general household waste.
SHELF LIFE. 24 months.
COMPOSITION. Alkyd varnish, lightfast pigments (expect colorless), biocide and fungicide additives, UV-filters, micro waxes, white spirit.
COLOR PALETTE:
1. colorless, 2. white, 3. cowslip, 4. oregon, 5. oak, 6. teak, 7. walnut, 8. rowan, 9. mahogany, 10. rosewood. Tinting is possible.
Specification 2311-011-76200405-2009
State Registration Certificate No. RU.78.01.06.008.E.000977.02.12 dd. 27.02.2012
