FLEXIBLE RUBBER PAINT NEOMID
Specification 2316-014-65917376-2015 State Registration Certificate No. RU.77.01.34.015.E.002219.10.15 dd. 15.10.2015
PURPOSE:
It is formulated to protect and decorate roof, drainage systems, fencing, exterior walls, basements, as well as walls and decorative elements in dry and wet rooms (kitchens, bathrooms, basements).
PROPERTIES:
- Great coverage and elasticity.
- Conceals surface imperfections and prevents cracking.
- Prevents the growth of mold and fungi.
- Improves sound insulation of roofing materials.
- Water-repellent, weather resistant (UV rays, rain, snow), vapor permeable, resistant to washing with detergents and non-abrasive cleaning materials.
- Formulated to offer 8-10 years protection.
SURFACE PREPARATION: Make sure the surface is dry and free from dust, resin, grease, rust and flaking paint. It is good practice to test a small area to determine the color and compatibility. If necessary, degrease the surface with white spirit or 10% soda solution. Sand previously painted gloss surfaces until smooth.
APPLICATION: Apply only when air and surface temperatures are between +5°С and +30°С and relative humidity is below 80%. Stir thoroughly before use and during application. Apply 2-3 coats with a brush, paint roller or spray gun. If necessary, thin the paint with up to 5% of water.
TWO COAT COVERAGE: Galvanized steel, pre-primed metal: 170-220 g/sq.m.
Roofing slates, plasterboard, mineral surfaces: 170-220 g/sq.m.
Wooden surfaces: 230-280 g/sq.m.
Roofing slates, plasterboard, mineral surfaces: 170-220 g/sq.m.
Wooden surfaces: 230-280 g/sq.m.
DRYING TIME: Up to 2 hours at +20°С and relative humidity not higher than 50% for 1 coat. Intermediate drying – 1 hour.
SAFETY PRECAUTIONS: Use in a well-ventilated area, wear appropriate protective clothing, protective gloves, eye and respiratory protection. Avoid contact with skin and eyes. In case of contact with eyes, rinse with plenty of water and seek medical advice. Keep out of the reach of children!
STORAGE AND TRANSPORTATION: Store in tightly-closed container in dry rooms at temperatures of 5°C to +30°С. It withstands up to 10 freeze-thaw cycles at temperatures as low as -20°С. Thaw in the original container at room temperature for at least 24 hours. Dispose of tightly closed containers with product residue at household waste disposal site.
COMPOSITION: Water, fillers, latex composition, pigments, preservative.
Specification 2316-014-65917376-2015
State Registration Certificate No. RU.77.01.34.015.E.002219.10.15 dd. 15.10.2015
exterior/interior
brush, paint roller, spray gun
+5°С<t<+30°С
2-3
galvanized steel, pre-primed metal: 170-220 g/sq.m; roofing slates, plasterboard, mineral surfaces: 170-220 g/sq.m; wooden surfaces: 230-280 g/sq.m
up to 2 hours at +20°С and relative humidity not higher than 50% for 1 coat. Intermediate drying – 1 hour
white, allows for manual and automated tinting
water
+5°С<t<+30°С, up to 10 freeze-thaw cycles
24 months